If you are in need of NSN parts such as 014C0224AMP45, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Helical and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Warren Pumps Llc.
Note : We will not share your information to any third parties.
Each of our NSN 3020006061062 parts like 014C0224AMP45 by Warren Pumps Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Warren Pumps Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-606-1062 Item Description: Gear Helical | 3020 | 006061062 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
014c0224amp45 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID" |
AGJS | PITCH DIAMETER | 3.9990 INCHES MINIMUM AND 4.0000 INCHES MAXIMUM" |
AJLA | TEETH QUANTITY | 40" |
ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 4.1575 INCHES" |
CWMW | TEETH TYPE | SINGLE HELIX" |
CWNH | TOOTH FORM | STANDARD" |
CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
CWPZ | HELIX ANGLE | 45.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.051 INCHES BOTH ENDS" |
CWRM | FACE NOMINAL WIDTH | 4.086 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 2.1655 INCHES BOTH ENDS" |
CWSN | KEYWAY NOMINAL WIDTH | 0.505 INCHES BOTH ENDS" |
CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.313 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS" |
CWTX | HUB NOMINAL DIAMETER | 3.810 INCHES BOTH ENDS" |
MATT | III MATERIAL | STEEL OVERALL" |
STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
AAQL | BODY STYLE | PLAIN, SOLID" |
AGJS | PITCH DIAMETER | 3.9990 INCHES MINIMUM AND 4.0000 INCHES MAXIMUM" |
AJLA | TEETH QUANTITY | 40" |
ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 4.1575 INCHES" |
CWMW | TEETH TYPE | SINGLE HELIX" |
CWNH | TOOTH FORM | STANDARD" |
CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
CWPZ | HELIX ANGLE | 45.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.051 INCHES BOTH ENDS" |
CWRM | FACE NOMINAL WIDTH | 4.086 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 2.1655 INCHES BOTH ENDS" |
CWSN | KEYWAY NOMINAL WIDTH | 0.505 INCHES BOTH ENDS" |
CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.313 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS" |
CWTX | HUB NOMINAL DIAMETER | 3.810 INCHES BOTH ENDS" |
MATT | III MATERIAL | STEEL OVERALL" |
STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|