If you are in need of NSN parts such as HCF1572B, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Hose Assembly Nonmetallic and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Vme Americas Inc.
Note : We will not share your information to any third parties.
Each of our NSN 4720008327163 parts like HCF1572B by Vme Americas Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Vme Americas Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-832-7163 Item Description: Hose Assembly Nonmetallic | 4720 | 008327163 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Hcf1572b | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 1.500 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES" |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END" |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS" |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT AND OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 48.000 INCHES NOMINAL OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| TEST | TEST DATA DOCUMENT | 19207-8327163 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| THSD | THREAD SERIES DESIGNATOR | NPTF 1ST END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 1.500 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES" |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END" |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS" |
| CQBD | BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT AND OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 48.000 INCHES NOMINAL OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE" |
| TEST | TEST DATA DOCUMENT | 19207-8327163 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| THSD | THREAD SERIES DESIGNATOR | NPTF 1ST END" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
