If you are in need of NSN parts such as 044748, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Bevel and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Vme Americas Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020004188405 parts like 044748 by Vme Americas Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Vme Americas Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-418-8405 Item Description: Gear Bevel | 3020 | 004188405 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 044748 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 9.0000 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 18" |
| ANTP | BORE STYLE | TAPERED W/KEYWAY FIRST END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.7070 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 3.1250 INCHES" |
| CWMW | TEETH TYPE | STRAIGHT" |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
| CWQD | PITCH ANGLE | 45.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.1250 INCHES SECOND END" |
| CWRM | FACE NOMINAL WIDTH | 3.0000 INCHES" |
| CWSN | KEYWAY NOMINAL WIDTH | 0.5000 INCHES FIRST END" |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.4690 INCHES FIRST END" |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | 1.9390 INCHES FIRST END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 5.0000 INCHES SECOND END" |
| MATT | III MATERIAL | STEEL COMP 1040 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 9.0000 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 18" |
| ANTP | BORE STYLE | TAPERED W/KEYWAY FIRST END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.7070 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 3.1250 INCHES" |
| CWMW | TEETH TYPE | STRAIGHT" |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
| CWQD | PITCH ANGLE | 45.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.1250 INCHES SECOND END" |
| CWRM | FACE NOMINAL WIDTH | 3.0000 INCHES" |
| CWSN | KEYWAY NOMINAL WIDTH | 0.5000 INCHES FIRST END" |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.4690 INCHES FIRST END" |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | 1.9390 INCHES FIRST END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 5.0000 INCHES SECOND END" |
| MATT | III MATERIAL | STEEL COMP 1040 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
