If you are in need of NSN parts such as 302-5056, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Vishay Thin Film Llc.
Note : We will not share your information to any third parties.
Each of our NSN 5905013160913 parts like 302-5056 by Vishay Thin Film Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Vishay Thin Film Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-316-0913 Item Description: Resistor Variable Wire Wound Pre | 5905 | 013160913 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 302-5056 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.812 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AECZ | MOUNTING LIP DIAMETER | 1.9950 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0880 NOMINAL MILS AND 0.0980 NOMINAL CENTIMETERS |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | AN/MST-T1V |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 7TH SECONDARY QUALITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK SINGLE PRIMARY |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| ZZZK | SPECIFICATION/STANDARD DATA | 32255-41642 MANUFACTURERS SPECIFICATION CONTROL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| CBME | III CUBIC MEASURE | 2.805 CUBIC INCHES |
| ABPM | BODY DIAMETER | 1.985 NOMINAL MILS AND 2.015 NOMINAL CENTIMETERS |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION |
| AAVL | PILOT DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABXF | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.821 INCHES MINIMUM AND 0.841 INCHES MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.03 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | BRAKE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
