If you are in need of NSN parts such as 1280M84P02, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Pin Shoulder Headless and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like United Precision Products.
Note : We will not share your information to any third parties.
Each of our NSN 5315012150193 parts like 1280M84P02 by United Precision Products is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as United Precision Products and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-215-0193 Item Description: Pin Shoulder Headless | 5315 | 012150193 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 1280m84p02 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED" |
| AAHP | SECOND END STYLE | CHAMFERED" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| AATR | SHANK LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM" |
| AAZE | SHANK DIAMETER | 0.190 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.130 INCHES MINIMUM AND 1.170 INCHES MAXIMUM" |
| AMCS | FIRST END TAPER LENGTH | 0.040 INCHES MAXIMUM" |
| AMFM | SECOND END TAPER LENGTH | 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM" |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL" |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES" |
| CQTR | SECOND SHANK DIAMETER | 0.162 INCHES MINIMUM AND 0.166 INCHES MAXIMUM" |
| CRDY | FIRST END LOCATION | THREADED END" |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL" |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES LONG END" |
| CTHC | SECOND END TAPER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM" |
| CWAS | SECOND SHANK LENGTH | 0.550 INCHES MINIMUM AND 0.590 INCHES MAXIMUM" |
| MATT | MATERIAL | NICKEL ALLOY OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | B50TF15 CLA FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | SHOULDER" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAGZ | FIRST END STYLE | CHAMFERED" |
| AAHP | SECOND END STYLE | CHAMFERED" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| AATR | SHANK LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM" |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM" |
| AAZE | SHANK DIAMETER | 0.190 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.130 INCHES MINIMUM AND 1.170 INCHES MAXIMUM" |
| AMCS | FIRST END TAPER LENGTH | 0.040 INCHES MAXIMUM" |
| AMFM | SECOND END TAPER LENGTH | 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM" |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL" |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES" |
| CQTR | SECOND SHANK DIAMETER | 0.162 INCHES MINIMUM AND 0.166 INCHES MAXIMUM" |
| CRDY | FIRST END LOCATION | THREADED END" |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL" |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES LONG END" |
| CTHC | SECOND END TAPER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM" |
| CWAS | SECOND SHANK LENGTH | 0.550 INCHES MINIMUM AND 0.590 INCHES MAXIMUM" |
| MATT | MATERIAL | NICKEL ALLOY OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | B50TF15 CLA FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | SHOULDER" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
