If you are in need of NSN parts such as HB4E212KLT, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bearing Plain Rod End and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like U S Bearings.
Note : We will not share your information to any third parties.
Each of our NSN 3120013116358 parts like HB4E212KLT by U S Bearings is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as U S Bearings and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-311-6358 Item Description: Bearing Plain Rod End | 3120 | 013116358 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Hb4e212klt | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | LEFT-HAND" |
| AAZF | SHANK STYLE | EXTERNALLY THREADED" |
| ABHP | OVERALL LENGTH | 1.9650 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM" |
| ADZG | LUBRICATION MATERIAL | LUBRICANT, DRY FILM" |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM" |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM" |
| AGGH | OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM" |
| AGGJ | INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM" |
| AGGY | SHANK THREAD LENGTH | 0.9380 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM" |
| AWDP | THREAD DIAMETER | 0.3125 INCHES NOMINAL" |
| CMLP | THREAD QUANTITY PER INCH | 24" |
| FEAT | SPECIAL FEATURES | DRY FILM LUBRICANT APPLIED PER BAC 5814,CAGEC 81205,TO THE BALL 0.D.; NAS 559 KEYWAY IN SHANK; LUBE GROOVES AND HOLES ARE OPTIONAL FOR DRY FILM LUBRICANT" |
| MATT | MATERIAL | STEEL COMP 440C INNER MEMBER" |
| MATT | MATERIAL | STEEL COMP XM-12 RACE INSERT AND STEEL COMP 630 RACE INSERT" |
| MATT | MATERIAL | STEEL COMP XM-12 ROD END BODY AND STEEL COMP 630 ROD END BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5658 ASSN STD 1ST MATERIAL RESPONSE RACE INSERT OR AMS 5659 ASSN STD 1ST MATERIAL RESPONSE RACE INSERT OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE RACE INSERT" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5658 ASSN STD 1ST MATERIAL RESPONSE ROD END BODY OR AMS 5659 ASSN STD 1ST MATERIAL RESPONSE ROD END BODY OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE ROD END BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER" |
| SFTT | SURFACE TREATMENT | PASSIVATE ROD END BODY" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE ROD END BODY" |
| STYL | STYLE DESIGNATOR | BALL TYPE" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACB10Y MANUFACTURERS STANDARD" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | LEFT-HAND" |
| AAZF | SHANK STYLE | EXTERNALLY THREADED" |
| ABHP | OVERALL LENGTH | 1.9650 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM" |
| ADZG | LUBRICATION MATERIAL | LUBRICANT, DRY FILM" |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM" |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM" |
| AGGH | OUTER MEMBER WIDTH | 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM" |
| AGGJ | INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM" |
| AGGY | SHANK THREAD LENGTH | 0.9380 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM" |
| AWDP | THREAD DIAMETER | 0.3125 INCHES NOMINAL" |
| CMLP | THREAD QUANTITY PER INCH | 24" |
| FEAT | SPECIAL FEATURES | DRY FILM LUBRICANT APPLIED PER BAC 5814,CAGEC 81205,TO THE BALL 0.D.; NAS 559 KEYWAY IN SHANK; LUBE GROOVES AND HOLES ARE OPTIONAL FOR DRY FILM LUBRICANT" |
| MATT | MATERIAL | STEEL COMP 440C INNER MEMBER" |
| MATT | MATERIAL | STEEL COMP XM-12 RACE INSERT AND STEEL COMP 630 RACE INSERT" |
| MATT | MATERIAL | STEEL COMP XM-12 ROD END BODY AND STEEL COMP 630 ROD END BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5658 ASSN STD 1ST MATERIAL RESPONSE RACE INSERT OR AMS 5659 ASSN STD 1ST MATERIAL RESPONSE RACE INSERT OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE RACE INSERT" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5658 ASSN STD 1ST MATERIAL RESPONSE ROD END BODY OR AMS 5659 ASSN STD 1ST MATERIAL RESPONSE ROD END BODY OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE ROD END BODY" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER MEMBER" |
| SFTT | SURFACE TREATMENT | PASSIVATE ROD END BODY" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE ROD END BODY" |
| STYL | STYLE DESIGNATOR | BALL TYPE" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACB10Y MANUFACTURERS STANDARD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
