If you are in need of NSN parts such as 5190302, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Bevel and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Translant Inc A Joint Venture.
Note : We will not share your information to any third parties.
Each of our NSN 3020013792077 parts like 5190302 by Translant Inc A Joint Venture is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Translant Inc A Joint Venture and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-379-2077 Item Description: Gear Bevel | 3020 | 013792077 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 5190302 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 2.1250 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 34" |
| ANTP | BORE STYLE | W/COUNTERBORE FIRST END" |
| ANTP | BORE STYLE | W/COUNTERBORE SECOND END" |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.257 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 1.700 INCHES" |
| CWMW | TEETH TYPE | SPIRAL" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQD | PITCH ANGLE | 30.8167 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.220 INCHES SECOND END" |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.100 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.375 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.584 INCHES BOTH ENDS" |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.340 INCHES SECOND END" |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.380 INCHES FIRST END" |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.620 INCHES FIRST END" |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.750 INCHES SECOND END" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 1.181 INCHES SECOND END" |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 9" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.070 INCHES SECOND END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 1.118 INCHES SECOND END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.136 INCHES SECOND END" |
| FEAT | SPECIAL FEATURES | MIDDLE OF BORE SPLINED,12 TEETH,24/48 PITCH,0.500 IN.P.D." |
| MATT | III MATERIAL | STEEL COMP 4140 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4140 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 2.1250 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 34" |
| ANTP | BORE STYLE | W/COUNTERBORE FIRST END" |
| ANTP | BORE STYLE | W/COUNTERBORE SECOND END" |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.257 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 1.700 INCHES" |
| CWMW | TEETH TYPE | SPIRAL" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQD | PITCH ANGLE | 30.8167 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.220 INCHES SECOND END" |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.100 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.375 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.584 INCHES BOTH ENDS" |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.340 INCHES SECOND END" |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.380 INCHES FIRST END" |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.620 INCHES FIRST END" |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.750 INCHES SECOND END" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 1.181 INCHES SECOND END" |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 9" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.070 INCHES SECOND END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 1.118 INCHES SECOND END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.136 INCHES SECOND END" |
| FEAT | SPECIAL FEATURES | MIDDLE OF BORE SPLINED,12 TEETH,24/48 PITCH,0.500 IN.P.D." |
| MATT | III MATERIAL | STEEL COMP 4140 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4140 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
