If you are in need of NSN parts such as 693172, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Thales Training And Simulation Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905009895601 parts like 693172 by Thales Training And Simulation Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Thales Training And Simulation Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-989-5601 Item Description: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009895601 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 693172 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.75000 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.82500 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.06200 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 1.825 INCHES NOMINAL" |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0" |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.938 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 2.000 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 2.00000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL" |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.001 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| AKPV | MOUNTING FACILITY QUANTITY | 3" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | THREADED HOLE" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 330.0 SINGLE SECTION AND 770.0 SINGLE SECTION AND 1050.0 SINGLE SECTION AND 1440.0 SINGLE SECTION AND 1770.0 SINGLE SECTION AND 2160.0 SINGLE SECTION AND 2490.0 SINGLE SECTION AND 2880.0 SINGLE SECTION AND 3220.0 SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/+0.10 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.125 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 9 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.75000 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.82500 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.06200 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 1.825 INCHES NOMINAL" |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0" |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.938 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 2.000 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 2.00000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL" |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.001 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| AKPV | MOUNTING FACILITY QUANTITY | 3" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | THREADED HOLE" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 330.0 SINGLE SECTION AND 770.0 SINGLE SECTION AND 1050.0 SINGLE SECTION AND 1440.0 SINGLE SECTION AND 1770.0 SINGLE SECTION AND 2160.0 SINGLE SECTION AND 2490.0 SINGLE SECTION AND 2880.0 SINGLE SECTION AND 3220.0 SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/+0.10 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.125 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 9 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
