If you are in need of NSN parts such as 290-6-502, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Subminiature Instrument Corp.
Note : We will not share your information to any third parties.
Each of our NSN 5905011801145 parts like 290-6-502 by Subminiature Instrument Corp is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Subminiature Instrument Corp and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-180-1145 Item Description: Resistor Variable Wire Wound Pre | 5905 | 011801145 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 290-6-502 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | OVERALL LENGTH | 1.237 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.2498 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.487 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | SLEEVE" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 0.15 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.15 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | STANDARD BUSHING" |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 175.0 SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/+2.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 56232-338598 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | OVERALL LENGTH | 1.237 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.2498 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.487 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | SLEEVE" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 0.15 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.15 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | STANDARD BUSHING" |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 175.0 SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/+2.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 56232-338598 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
