If you are in need of NSN parts such as 122897-12DD56, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bolt Shear and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Sps Technologies Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5306012349403 parts like 122897-12DD56 by Sps Technologies Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Sps Technologies Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-234-9403 Item Description: Bolt Shear | 5306 | 012349403 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 122897-12dd56 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.927 INCHES MINIMUM AND 1.052 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 3.485 INCHES MINIMUM AND 3.515 INCHES MAXIMUM" |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER" |
| AASU | HEAD HEIGHT | 0.472 INCHES MINIMUM AND 0.512 INCHES MAXIMUM" |
| AATB | WIDTH BETWEEN FLATS | 0.222 INCHES MINIMUM AND 0.227 INCHES MAXIMUM" |
| AATC | EXTENDED WASHER DIAMETER | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM" |
| AATD | EXTENDED WASHER THICKNESS | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM" |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM ALL HOLES AND 0.146 INCHES MAXIMUM ALL HOLES" |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES" |
| ANEE | GRIP LENGTH | 2.438 INCHES MINIMUM AND 2.458 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH" |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.267 INCHES MINIMUM ALL HOLES AND 3.307 INCHES MAXIMUM ALL HOLES" |
| FEAT | SPECIAL FEATURES | TWO HOLES 90 DEGREES APART" |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.927 INCHES MINIMUM AND 1.052 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 3.485 INCHES MINIMUM AND 3.515 INCHES MAXIMUM" |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER" |
| AASU | HEAD HEIGHT | 0.472 INCHES MINIMUM AND 0.512 INCHES MAXIMUM" |
| AATB | WIDTH BETWEEN FLATS | 0.222 INCHES MINIMUM AND 0.227 INCHES MAXIMUM" |
| AATC | EXTENDED WASHER DIAMETER | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM" |
| AATD | EXTENDED WASHER THICKNESS | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM" |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM ALL HOLES AND 0.146 INCHES MAXIMUM ALL HOLES" |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES" |
| ANEE | GRIP LENGTH | 2.438 INCHES MINIMUM AND 2.458 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH" |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.267 INCHES MINIMUM ALL HOLES AND 3.307 INCHES MAXIMUM ALL HOLES" |
| FEAT | SPECIAL FEATURES | TWO HOLES 90 DEGREES APART" |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
