If you are in need of NSN parts such as SWS10, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Worm and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Southern Gear And Machine Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020007961113 parts like SWS10 by Southern Gear And Machine Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Southern Gear And Machine Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-796-1113 Item Description: Gear Worm | 3020 | 007961113 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
Sws10 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AGJS | PITCH DIAMETER | 0.3333 INCHES NOMINAL" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CWFR | NOMINAL OVERALL LENGTH | 0.625 INCHES" |
CWPC | THREAD FORM QUANTITY | 1" |
CWPH | THREAD FORM DIRECTION | RIGHT-HAND" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWPZ | HELIX ANGLE | 2.3832 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END" |
CWRM | FACE NOMINAL WIDTH | 0.438 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
CWTX | HUB NOMINAL DIAMETER | 0.280 INCHES FIRST END" |
MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL" |
STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
AGJS | PITCH DIAMETER | 0.3333 INCHES NOMINAL" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CWFR | NOMINAL OVERALL LENGTH | 0.625 INCHES" |
CWPC | THREAD FORM QUANTITY | 1" |
CWPH | THREAD FORM DIRECTION | RIGHT-HAND" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWPZ | HELIX ANGLE | 2.3832 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END" |
CWRM | FACE NOMINAL WIDTH | 0.438 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
CWTX | HUB NOMINAL DIAMETER | 0.280 INCHES FIRST END" |
MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL" |
STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|