If you are in need of NSN parts such as MSC450-120-1875P2, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Slip Clutch Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Southern Gear And Machine Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020001416127 parts like MSC450-120-1875P2 by Southern Gear And Machine Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Southern Gear And Machine Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-141-6127 Item Description: GEAR-SLIP CLUTCH,SPUR | 3020 | 001416127 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
MSC450-120-1875P2 | 6 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
AGJS | PITCH DIAMETER | 1.5000 INCHES NOMINAL" |
AJCG | TORQUE CAPACITY | 1.00 INCH-OUNCES MINIMUM AND 10.11 INCH-OUNCES MAXIMUM" |
AJLA | TEETH QUANTITY | 120" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END" |
CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END" |
CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END" |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.5160 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.562 INCHES" |
CWNH | TOOTH FORM | SPECIAL" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.225 INCHES FIRST END" |
CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS" |
CWTN | NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.212 INCHES" |
CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END" |
MATT | III MATERIAL | STEEL OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 TYPE 303 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
STYL | STYLE DESIGNATOR | ADJUSTABLE TORQUE, SPRING WASHER LOADED" |
ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
AGJS | PITCH DIAMETER | 1.5000 INCHES NOMINAL" |
AJCG | TORQUE CAPACITY | 1.00 INCH-OUNCES MINIMUM AND 10.11 INCH-OUNCES MAXIMUM" |
AJLA | TEETH QUANTITY | 120" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END" |
CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END" |
CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END" |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.5160 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.562 INCHES" |
CWNH | TOOTH FORM | SPECIAL" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.225 INCHES FIRST END" |
CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS" |
CWTN | NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.212 INCHES" |
CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END" |
MATT | III MATERIAL | STEEL OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 TYPE 303 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
STYL | STYLE DESIGNATOR | ADJUSTABLE TORQUE, SPRING WASHER LOADED" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
![]() |
|