If you are in need of NSN parts such as 37-811168-2, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Sensor Systems Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905010412814 parts like 37-811168-2 by Sensor Systems Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Sensor Systems Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-041-2814 Item Description: Resistor Variable Wire Wound Pre | 5905 | 010412814 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 37-811168-2 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.9688 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.867 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.9688 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 1.062 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.690 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 1.177 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.626 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.0620 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, UNDERCUT" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 330.0 MINIMUM" |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES" |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 180.0 SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 MINIMUM" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 07397-37-811168 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.9688 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.867 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.9688 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 1.062 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.690 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 1.177 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.626 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.0620 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, UNDERCUT" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 330.0 MINIMUM" |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES" |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 180.0 SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 MINIMUM" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.25 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2500.0 SINGLE SECTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 07397-37-811168 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
