If you are in need of NSN parts such as MD05-10-3047, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Sensor Systems Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905009059730 parts like MD05-10-3047 by Sensor Systems Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Sensor Systems Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-905-9730 Item Description: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009059730 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| MD05-10-3047 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.3750 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0400 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.000 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.437 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.000 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 0.545 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0820 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.20 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0015 INCHES" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20/+0.20 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION PROPORTIONAL CONFORMITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 06481-914017 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.3750 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0400 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.000 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.437 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.000 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 0.545 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0820 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.20 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0015 INCHES" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20/+0.20 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION PROPORTIONAL CONFORMITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 06481-914017 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
