If you are in need of NSN parts such as 10T3SECN0NL1N, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Sensor Systems Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905009039675 parts like 10T3SECN0NL1N by Sensor Systems Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Sensor Systems Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-903-9675 Item Description: Resistor Variable Wire Wound Pre | 5905 | 009039675 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 10t3secn0nl1n | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.5620 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 1.830 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.812 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 2.500 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.8120 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFK | MAXIMUM STARTING TORQUE | 2.30 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 1.80 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.0005 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0005 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0005 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.05" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 PERCENT, RATED AMPERES C AND BETTER FINISH" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES C AND BETTER SELECT" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 ALL SECTIONS" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05/+0.05 ALL SECTIONS" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 130.0 ALL SECTIONS" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS GRAPH" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS" |
| TEST | TEST DATA DOCUMENT | 06481-900056-10 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TURRET" |
| AAPN | SECTION QUANTITY | 3" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.5620 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.625 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 1.830 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.812 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 2.500 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.8120 INCHES MAXIMUM" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFK | MAXIMUM STARTING TORQUE | 2.30 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 1.80 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.003 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.0005 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0005 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0005 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.05" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.0 PERCENT, RATED AMPERES C AND BETTER FINISH" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 PERCENT, RATED AMPERES C AND BETTER SELECT" |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1800.0 ALL SECTIONS" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.05/+0.05 ALL SECTIONS" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 130.0 ALL SECTIONS" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS" |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS GRAPH" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS" |
| TEST | TEST DATA DOCUMENT | 06481-900056-10 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
