If you are in need of NSN parts such as 1810D-V24, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Sensor Systems Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905008243036 parts like 1810D-V24 by Sensor Systems Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Sensor Systems Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-824-3036 Item Description: Resistor Variable Wire Wound Pre | 5905 | 008243036 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 1810d-V24 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8750 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.917 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0700 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL" |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0" |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 4.109 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| AKPV | MOUNTING FACILITY QUANTITY | 3" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | THREADED HOLE" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT, RATED AMPERES C AND BETTER FINISH" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.015/+0.015 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ZERO BASED LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 75.0 ALL SECTIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG" |
| AAPN | SECTION QUANTITY | 2" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8750 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 1.917 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0700 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL" |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0" |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 4.109 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| AKPV | MOUNTING FACILITY QUANTITY | 3" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | THREADED HOLE" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT, RATED AMPERES C AND BETTER FINISH" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.015/+0.015 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ZERO BASED LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 75.0 ALL SECTIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
