If you are in need of NSN parts such as 9106, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Nonwire Wound and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Sensor Systems Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905000612154 parts like 9106 by Sensor Systems Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Sensor Systems Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-061-2154 Item Description: Resistor Variable Nonwire Wound | 5905 | 000612154 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 9106 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AAVL | PILOT DIAMETER | 0.96880 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.462 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 1.000 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.05700 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 1.000 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.620 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.812 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.362 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.09500 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.00200 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0007 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.15" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -500.0/+500.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.125 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 115.0 SINGLE SECTION" |
| CSDL | UNABLE TO DECODE | UNABLE TO DECODE" |
| TEST | TEST DATA DOCUMENT | 89954-539D763 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| AAVL | PILOT DIAMETER | 0.96880 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.06200 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.462 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 1.000 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.05700 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 1.000 INCHES MAXIMUM" |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.620 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.812 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 1.362 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.09500 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.00200 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.0007 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.15" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.000 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -500.0/+500.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.125 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 115.0 SINGLE SECTION" |
| CSDL | UNABLE TO DECODE | UNABLE TO DECODE" |
| TEST | TEST DATA DOCUMENT | 89954-539D763 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
