If you are in need of NSN parts such as GP28-50P1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Secs Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020004860354 parts like GP28-50P1 by Secs Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Secs Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-486-0354 Item Description: Gear Spur | 3020 | 004860354 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Gp28-50p1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 0.7812 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 50" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.813 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 0.312 INCHES" |
| CWNH | TOOTH FORM | STUB" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 0.7812 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 50" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.813 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 0.312 INCHES" |
| CWNH | TOOTH FORM | STUB" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
