If you are in need of NSN parts such as 10267695-36, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Capacitor Fixed Ceramic Dielectr and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Rpl Electronics Co.
Note : We will not share your information to any third parties.
Each of our NSN 5910012250624 parts like 10267695-36 by Rpl Electronics Co is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Rpl Electronics Co and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-225-0624 Item Description: Capacitor Fixed Ceramic Dielectr | 5910 | 012250624 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 10267695-36 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM" |
| ADAQ | BODY LENGTH | 0.200 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 0.200 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.100 INCHES MAXIMUM" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.169 INCHES MINIMUM AND 0.231 INCHES MAXIMUM" |
| AEBT | TERMINAL DIAMETER | 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S)" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 200.000 PICOFARADS SINGLE SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM" |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -80.0 SINGLE SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION" |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS" |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD" |
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM" |
| ADAQ | BODY LENGTH | 0.200 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 0.200 INCHES MAXIMUM" |
| ADAU | BODY HEIGHT | 0.100 INCHES MAXIMUM" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.169 INCHES MINIMUM AND 0.231 INCHES MAXIMUM" |
| AEBT | TERMINAL DIAMETER | 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S)" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 200.000 PICOFARADS SINGLE SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM" |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -80.0 SINGLE SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION" |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHMS" |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
