If you are in need of NSN parts such as 381-1622-010, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Rockwell Collins Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905002438554 parts like 381-1622-010 by Rockwell Collins Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Rockwell Collins Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-243-8554 Item Description: Resistor Variable Wire Wound Pre | 5905 | 002438554 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 381-1622-010 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.011 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.625 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0680 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.438 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.573 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 1.047 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | SLEEVE" |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW-CW" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION" |
| FEAT | SPECIAL FEATURES | USED ON WEAPON SUSTEMS,485L TACS AND COMMUNICATIONS PROGRAM COMBAT THEATER TRI-TAC 478T" |
| TEST | TEST DATA DOCUMENT | 13499-381-1622 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.011 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.625 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0680 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.875 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.438 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.573 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 1.047 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | SLEEVE" |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW-CW" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0/+3.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS" |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION" |
| FEAT | SPECIAL FEATURES | USED ON WEAPON SUSTEMS,485L TACS AND COMMUNICATIONS PROGRAM COMBAT THEATER TRI-TAC 478T" |
| TEST | TEST DATA DOCUMENT | 13499-381-1622 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
