If you are in need of NSN parts such as 5775, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Helical and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Rexworks Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020006940420 parts like 5775 by Rexworks Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Rexworks Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-694-0420 Item Description: Gear Helical | 3020 | 006940420 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 5775 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED, SOLID" |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 5.5390 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 36" |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS" |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.1710 INCHES" |
| CWMW | TEETH TYPE | SINGLE HELIX" |
| CWNH | TOOTH FORM | STANDARD" |
| CWNM | TOOTH DIRECTION | RIGHT" |
| CWPP | PRESSURE ANGLE | 18.4665 DEGREES" |
| CWPZ | HELIX ANGLE | 23.4167 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.385 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 1.438 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.052 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 2.937 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL COMP 8620 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB" |
| AAQL | BODY STYLE | WEBBED, SOLID" |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 5.5390 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 36" |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS" |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.1710 INCHES" |
| CWMW | TEETH TYPE | SINGLE HELIX" |
| CWNH | TOOTH FORM | STANDARD" |
| CWNM | TOOTH DIRECTION | RIGHT" |
| CWPP | PRESSURE ANGLE | 18.4665 DEGREES" |
| CWPZ | HELIX ANGLE | 23.4167 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.385 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 1.438 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.052 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 2.937 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL COMP 8620 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE FLUSH HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
