If you are in need of NSN parts such as SM5-8C-3, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bearing Roller Rod End and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Rexnord Industries Llc.
Note : We will not share your information to any third parties.
Each of our NSN 3110005165512 parts like SM5-8C-3 by Rexnord Industries Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Rexnord Industries Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-516-5512 Item Description: Bearing Roller Rod End | 3110 | 005165512 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Sm5-8c-3 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AAZE | SHANK DIAMETER | 0.5000 INCHES NOMINAL" |
| AAZF | SHANK STYLE | EXTERNALLY THREADED" |
| ABHP | OVERALL LENGTH | 3.1100 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.3125 INCHES NOMINAL" |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.4100 INCHES NOMINAL" |
| ADZG | LUBRICATION MATERIAL | GREASE" |
| AGGY | SHANK THREAD LENGTH | 1.3125 INCHES NOMINAL" |
| AGVT | OUTER RING WIDTH | 0.4600 INCHES NOMINAL" |
| AGVU | INNER RING WIDTH | 0.6870 INCHES NOMINAL" |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.4100 INCHES NOMINAL" |
| AGYJ | SEAL QUANTITY | 2" |
| AGYW | BEARING SEAL TYPE | CONTACT" |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING" |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL" |
| CMLP | THREAD QUANTITY PER INCH | 20" |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES" |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL" |
| FEAT | SPECIAL FEATURES | WITH FLUSH TYPE GREASE FITTING" |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE" |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL" |
| MATT | MATERIAL | STEEL INNER RING" |
| MATT | MATERIAL | STEEL OUTER RING" |
| MATT | MATERIAL | STEEL ROLLER" |
| MATT | MATERIAL | STEEL SHAFT" |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES" |
| STYL | STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AAZE | SHANK DIAMETER | 0.5000 INCHES NOMINAL" |
| AAZF | SHANK STYLE | EXTERNALLY THREADED" |
| ABHP | OVERALL LENGTH | 3.1100 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.3125 INCHES NOMINAL" |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.4100 INCHES NOMINAL" |
| ADZG | LUBRICATION MATERIAL | GREASE" |
| AGGY | SHANK THREAD LENGTH | 1.3125 INCHES NOMINAL" |
| AGVT | OUTER RING WIDTH | 0.4600 INCHES NOMINAL" |
| AGVU | INNER RING WIDTH | 0.6870 INCHES NOMINAL" |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.4100 INCHES NOMINAL" |
| AGYJ | SEAL QUANTITY | 2" |
| AGYW | BEARING SEAL TYPE | CONTACT" |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING" |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL" |
| CMLP | THREAD QUANTITY PER INCH | 20" |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES" |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL" |
| FEAT | SPECIAL FEATURES | WITH FLUSH TYPE GREASE FITTING" |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE" |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL" |
| MATT | MATERIAL | STEEL INNER RING" |
| MATT | MATERIAL | STEEL OUTER RING" |
| MATT | MATERIAL | STEEL ROLLER" |
| MATT | MATERIAL | STEEL SHAFT" |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES" |
| STYL | STYLE DESIGNATOR | SINGLE ROW, CONCAVE ROLLERS" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
