If you are in need of NSN parts such as 5190300, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Bevel and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Raytheon Co.
Note : We will not share your information to any third parties.
Each of our NSN 3020013794444 parts like 5190300 by Raytheon Co is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Raytheon Co and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-379-4444 Item Description: Gear Bevel | 3020 | 013794444 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 5190300 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 3.5620 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 57" |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS" |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.602 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 0.998 INCHES" |
| CWMW | TEETH TYPE | SPIRAL" |
| CWNM | TOOTH DIRECTION | RIGHT" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQD | PITCH ANGLE | 59.1832 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.815 INCHES SECOND END" |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.183 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.375 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.187 INCHES BOTH ENDS" |
| CWSN | KEYWAY NOMINAL WIDTH | 0.250 INCHES BOTH ENDS" |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.716 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END" |
| MATT | III MATERIAL | STEEL COMP 4140 OVERALL" |
| SFTT | SURFACE TREATMENT | PHOSPHATE TEETH" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TYPE M CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE TEETH" |
| STYL | STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 3.5620 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 57" |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS" |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.602 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 0.998 INCHES" |
| CWMW | TEETH TYPE | SPIRAL" |
| CWNM | TOOTH DIRECTION | RIGHT" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQD | PITCH ANGLE | 59.1832 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.815 INCHES SECOND END" |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.183 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.375 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.187 INCHES BOTH ENDS" |
| CWSN | KEYWAY NOMINAL WIDTH | 0.250 INCHES BOTH ENDS" |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.716 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES SECOND END" |
| MATT | III MATERIAL | STEEL COMP 4140 OVERALL" |
| SFTT | SURFACE TREATMENT | PHOSPHATE TEETH" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TYPE M CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE TEETH" |
| STYL | STYLE DESIGNATOR | SIDE FACE, BACK HUB PROTRUDING" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
