If you are in need of NSN parts such as G0012023GA, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Generator Engine Accessory and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Prestolite Electric Inc.
Note : We will not share your information to any third parties.
Each of our NSN 2920002445103 parts like G0012023GA by Prestolite Electric Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Prestolite Electric Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-244-5103 Item Description: Generator Engine Accessory | 2920 | 002445103 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| G0012023ga | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.656 INCHES NOMINAL" |
| ABPT | SECOND STEP DIAMETER | 0.875 INCHES NOMINAL" |
| ABRR | KEYWAY WIDTH | 0.250 INCHES NOMINAL" |
| ABVA | UNTHREADED PORTION LENGTH | 1.375 INCHES NOMINAL" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BODY MTD W/FOUR THREADED MTG HOLES" |
| ADPY | PILOT HEIGHT | 0.344 INCHES NOMINAL" |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| AFYS | KEYWAY LENGTH | 1.000 INCHES NOMINAL" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE" |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.344 INCHES NOMINAL" |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL" |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1100" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 20.0" |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 900" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCGW | DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 3.219 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0" |
| BCMK | DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 7.219 INCHES NOMINAL" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3500" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 2A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.438 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 20" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| ELEC | VOLTAGE IN VOLTS | 32.0" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.656 INCHES NOMINAL" |
| ABPT | SECOND STEP DIAMETER | 0.875 INCHES NOMINAL" |
| ABRR | KEYWAY WIDTH | 0.250 INCHES NOMINAL" |
| ABVA | UNTHREADED PORTION LENGTH | 1.375 INCHES NOMINAL" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BODY MTD W/FOUR THREADED MTG HOLES" |
| ADPY | PILOT HEIGHT | 0.344 INCHES NOMINAL" |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT" |
| AFYS | KEYWAY LENGTH | 1.000 INCHES NOMINAL" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE" |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.344 INCHES NOMINAL" |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL" |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1100" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 20.0" |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 900" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCGW | DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 3.219 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0" |
| BCMK | DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 7.219 INCHES NOMINAL" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 3500" |
| BZRR | THREAD SERIES | UNF" |
| CFHL | THREAD CLASS | 2A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.438 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 20" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| ELEC | VOLTAGE IN VOLTS | 32.0" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
