If you are in need of NSN parts such as 75A500803-2003, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Clamp Block Section and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Plastifab Incorporated.
Note : We will not share your information to any third parties.
Each of our NSN 5340011932743 parts like 75A500803-2003 by Plastifab Incorporated is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Plastifab Incorporated and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-193-2743 Item Description: Clamp Block Section | 5340 | 011932743 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 75a500803-2003 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 4.300 INCHES NOMINAL" |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM" |
| ABTJ | MOUNTING HOLE QUANTITY | 2" |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.250 INCHES NOMINAL" |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.148 INCHES MINIMUM AND 3.152 INCHES MAXIMUM" |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE" |
| BYGG | BLOCK HEIGHT | 0.700 INCHES NOMINAL" |
| CWTD | CLAMPING HOLE QUANTITY | 3" |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM FIRST HOLE AND 0.254 INCHES MAXIMUM FIRST HOLE" |
| CWWM | CLAMPING HOLE DIAMETER | 0.500 INCHES MINIMUM SECOND HOLE AND 0.504 INCHES MAXIMUM SECOND HOLE" |
| CWWM | CLAMPING HOLE DIAMETER | 0.750 INCHES MINIMUM THIRD HOLE AND 0.754 INCHES MAXIMUM THIRD HOLE" |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.890 INCHES NOMINAL" |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM" |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.238 INCHES MINIMUM AND 1.242 INCHES MAXIMUM" |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.880 INCHES NOMINAL" |
| MATT | MATERIAL | PLASTIC" |
| ABHP | OVERALL LENGTH | 4.300 INCHES NOMINAL" |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM" |
| ABTJ | MOUNTING HOLE QUANTITY | 2" |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.250 INCHES NOMINAL" |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.148 INCHES MINIMUM AND 3.152 INCHES MAXIMUM" |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE" |
| BYGG | BLOCK HEIGHT | 0.700 INCHES NOMINAL" |
| CWTD | CLAMPING HOLE QUANTITY | 3" |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM FIRST HOLE AND 0.254 INCHES MAXIMUM FIRST HOLE" |
| CWWM | CLAMPING HOLE DIAMETER | 0.500 INCHES MINIMUM SECOND HOLE AND 0.504 INCHES MAXIMUM SECOND HOLE" |
| CWWM | CLAMPING HOLE DIAMETER | 0.750 INCHES MINIMUM THIRD HOLE AND 0.754 INCHES MAXIMUM THIRD HOLE" |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.890 INCHES NOMINAL" |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM" |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.238 INCHES MINIMUM AND 1.242 INCHES MAXIMUM" |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.880 INCHES NOMINAL" |
| MATT | MATERIAL | PLASTIC" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
