If you are in need of NSN parts such as 2JC3582H56, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Perfection Clutch.
Note : We will not share your information to any third parties.
Each of our NSN 3020009263843 parts like 2JC3582H56 by Perfection Clutch is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Perfection Clutch and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-926-3843 Item Description: Gear Spur | 3020 | 009263843 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 2jc3582h56 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 1.1106 INCHES MINIMUM AND 1.1111 INCHES MAXIMUM" |
| AJLA | TEETH QUANTITY | 48" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| BDZQ | BACKLASH DESIGNATION | GRADE D" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.138 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.093 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END" |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 13" |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303/SAE 30303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 1.1106 INCHES MINIMUM AND 1.1111 INCHES MAXIMUM" |
| AJLA | TEETH QUANTITY | 48" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| BDZQ | BACKLASH DESIGNATION | GRADE D" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.138 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.187 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.093 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.312 INCHES FIRST END" |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 13" |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303/SAE 30303 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
