If you are in need of NSN parts such as WT291-12, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Perfection Clutch.
Note : We will not share your information to any third parties.
Each of our NSN 3020008473088 parts like WT291-12 by Perfection Clutch is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Perfection Clutch and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-847-3088 Item Description: Gear Spur | 3020 | 008473088 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Wt291-12 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED, OFFSET, SOLID" |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 6.0938 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 37" |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS" |
| CBBL | FEATURES PROVIDED | CASEHARDENED" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.425 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.070 INCHES SECOND END" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.548 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.982 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.416 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 3.210 INCHES SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 3.946 INCHES FIRST END" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.281 INCHES FIRST END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 3.433 INCHES FIRST END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.170 INCHES FIRST END" |
| FEAT | SPECIAL FEATURES | SECOND END COUNTERBORE,2.595 IN. NOMINAL DIA.,0.475 IN. NOMINAL DEPTH. 27 SPLINE TEETH IN COUNTERBORE,2.595 IN. MINOR DIA.,2.812 IN. MAJOR DIA." |
| MATT | III MATERIAL | STEEL OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
| AAQL | BODY STYLE | WEBBED, OFFSET, SOLID" |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 6.0938 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 37" |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS" |
| CBBL | FEATURES PROVIDED | CASEHARDENED" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.425 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.070 INCHES SECOND END" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.548 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.982 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.416 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 3.210 INCHES SECOND END" |
| CWTX | HUB NOMINAL DIAMETER | 3.946 INCHES FIRST END" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.281 INCHES FIRST END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 3.433 INCHES FIRST END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.170 INCHES FIRST END" |
| FEAT | SPECIAL FEATURES | SECOND END COUNTERBORE,2.595 IN. NOMINAL DIA.,0.475 IN. NOMINAL DEPTH. 27 SPLINE TEETH IN COUNTERBORE,2.595 IN. MINOR DIA.,2.812 IN. MAJOR DIA." |
| MATT | III MATERIAL | STEEL OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
