If you are in need of NSN parts such as R406-11, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Helical and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Perfection Clutch.
Note : We will not share your information to any third parties.
Each of our NSN 3020007346781 parts like R406-11 by Perfection Clutch is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Perfection Clutch and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-734-6781 Item Description: Gear Helical | 3020 | 007346781 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| R406-11 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 5.5714 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 30" |
| ANTP | BORE STYLE | W/COUNTERBORE BOTH ENDS" |
| CQFM | HARDNESS RATING | 59.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.934 INCHES" |
| CWMW | TEETH TYPE | SINGLE HELIX" |
| CWNH | TOOTH FORM | STANDARD" |
| CWNM | TOOTH DIRECTION | LEFT" |
| CWPP | PRESSURE ANGLE | 17.5000 DEGREES" |
| CWPZ | HELIX ANGLE | 26.2053 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.891 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 1.281 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.754 INCHES SECOND END" |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.171 INCHES SECOND END" |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 4.0000 INCHES SECOND END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 4.445 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 5.5714 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 30" |
| ANTP | BORE STYLE | W/COUNTERBORE BOTH ENDS" |
| CQFM | HARDNESS RATING | 59.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.934 INCHES" |
| CWMW | TEETH TYPE | SINGLE HELIX" |
| CWNH | TOOTH FORM | STANDARD" |
| CWNM | TOOTH DIRECTION | LEFT" |
| CWPP | PRESSURE ANGLE | 17.5000 DEGREES" |
| CWPZ | HELIX ANGLE | 26.2053 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.891 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 1.281 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.754 INCHES SECOND END" |
| CWTB | COUNTERBORE NOMINAL DEPTH | 0.171 INCHES SECOND END" |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 4.0000 INCHES SECOND END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 4.445 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
