If you are in need of NSN parts such as WT215-12, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Perfection Clutch.
Note : We will not share your information to any third parties.
Each of our NSN 3020002744499 parts like WT215-12 by Perfection Clutch is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Perfection Clutch and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-274-4499 Item Description: Gear Spur | 3020 | 002744499 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Wt215-12 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED, SOLID" |
| ABSA | SPLINE QUANTITY | 6 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 7.2980 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 45" |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS" |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 63.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.541 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 1.734 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.562 INCHES FIRST END" |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.109 INCHES SECOND END" |
| CWRM | FACE NOMINAL WIDTH | 1.219 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.991 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 2.615 INCHES FIRST END" |
| CWWH | END NOMINAL LENGTH | 0.153 INCHES SECOND END" |
| CWWN | END NOMINAL DIAMETER | 3.125 INCHES SECOND END" |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.409 INCHES SECOND END" |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.615 INCHES SECOND END" |
| MATT | III MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB" |
| AAQL | BODY STYLE | WEBBED, SOLID" |
| ABSA | SPLINE QUANTITY | 6 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 7.2980 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 45" |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS" |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 63.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.541 INCHES" |
| CWFR | NOMINAL OVERALL LENGTH | 1.734 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.562 INCHES FIRST END" |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.109 INCHES SECOND END" |
| CWRM | FACE NOMINAL WIDTH | 1.219 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.991 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP SECOND END" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 2.615 INCHES FIRST END" |
| CWWH | END NOMINAL LENGTH | 0.153 INCHES SECOND END" |
| CWWN | END NOMINAL DIAMETER | 3.125 INCHES SECOND END" |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.409 INCHES SECOND END" |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.615 INCHES SECOND END" |
| MATT | III MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB, ONE RECESSED HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
