If you are in need of NSN parts such as 8809Y0AR4408, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Shaft Assembly Flexible and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Pennwalt Corp S S White Industri.
Note : We will not share your information to any third parties.
Each of our NSN 1680005809389 parts like 8809Y0AR4408 by Pennwalt Corp S S White Industri is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Pennwalt Corp S S White Industri and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1680-00-580-9389 Item Description: Shaft Assembly Flexible | 1680 | 005809389 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 8809y0ar4408 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B BOTH ENDS" |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.3326 INCHES NOMINAL BOTH ENDS" |
| ABHP | OVERALL LENGTH | 46.3125 INCHES NOMINAL" |
| ABSA | SPLINE QUANTITY | 14 BOTH ENDS" |
| ABSC | SPLINE MINOR DIAMETER | 0.2715 INCHES NOMINAL BOTH ENDS" |
| AECT | THREAD DEPTH | 0.328 INCHES NOMINAL BOTH ENDS" |
| AEDN | TIP LENGTH | 0.891 INCHES NOMINAL BOTH ENDS" |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS" |
| AGJS | PITCH DIAMETER | 0.2917 INCHES NOMINAL BOTH ENDS" |
| AJXJ | CORE MATERIAL | STEEL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS" |
| AKMH | CORE DIAMETER | 0.375 INCHES NOMINAL" |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS" |
| APTD | END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS" |
| ASDB | WIDTH ACROSS FLATS | 0.875 INCHES NOMINAL BOTH ENDS" |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS" |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 BOTH ENDS" |
| AXFH | SPLINE LENGTH | 0.469 INCHES NOMINAL BOTH ENDS" |
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS" |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS" |
| BJPS | III CASING MATERIAL | STEEL" |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS" |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.468 INCHES NOMINAL DIAMETER BOTH ENDS" |
| CFRM | TORSIONAL DEFLECTION RATING | 100 DEG AT 100 LB IN. MAX TORSIONAL DEFLECTION RATING IN WINDING DIRECTION,148 DEG AT 60 LB IN UNWINDING DIRECTION" |
| CFRN | CASING SURFACE TREATMENT | RUBBER, CHLOROPRENE" |
| CFRP | CASING LENGTH BETWEEN FERRULES | 44.500 INCHES NOMINAL" |
| CFRQ | CASING OUTSIDE DIAMETER | 0.790 INCHES NOMINAL" |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS" |
| CFRW | END OVERALL DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS" |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS" |
| CFRZ | CORE OVERALL LENGTH | 46.3125 INCHES NOMINAL" |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE" |
| CFSL | CORE REMOVABILITY | NONREMOVABLE" |
| CGDN | MINIMUM OPERATING RADIUS | 10.000 INCHES" |
| ZZZV | FSC APPLICATION DATA | ACFT WING FLAP CONTROL ASSEMBLY" |
| AAJD | THREAD CLASS | 3B BOTH ENDS" |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.3326 INCHES NOMINAL BOTH ENDS" |
| ABHP | OVERALL LENGTH | 46.3125 INCHES NOMINAL" |
| ABSA | SPLINE QUANTITY | 14 BOTH ENDS" |
| ABSC | SPLINE MINOR DIAMETER | 0.2715 INCHES NOMINAL BOTH ENDS" |
| AECT | THREAD DEPTH | 0.328 INCHES NOMINAL BOTH ENDS" |
| AEDN | TIP LENGTH | 0.891 INCHES NOMINAL BOTH ENDS" |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS" |
| AGJS | PITCH DIAMETER | 0.2917 INCHES NOMINAL BOTH ENDS" |
| AJXJ | CORE MATERIAL | STEEL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS" |
| AKMH | CORE DIAMETER | 0.375 INCHES NOMINAL" |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS" |
| APTD | END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS" |
| ASDB | WIDTH ACROSS FLATS | 0.875 INCHES NOMINAL BOTH ENDS" |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS" |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 BOTH ENDS" |
| AXFH | SPLINE LENGTH | 0.469 INCHES NOMINAL BOTH ENDS" |
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS" |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS" |
| BJPS | III CASING MATERIAL | STEEL" |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS" |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.468 INCHES NOMINAL DIAMETER BOTH ENDS" |
| CFRM | TORSIONAL DEFLECTION RATING | 100 DEG AT 100 LB IN. MAX TORSIONAL DEFLECTION RATING IN WINDING DIRECTION,148 DEG AT 60 LB IN UNWINDING DIRECTION" |
| CFRN | CASING SURFACE TREATMENT | RUBBER, CHLOROPRENE" |
| CFRP | CASING LENGTH BETWEEN FERRULES | 44.500 INCHES NOMINAL" |
| CFRQ | CASING OUTSIDE DIAMETER | 0.790 INCHES NOMINAL" |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS" |
| CFRW | END OVERALL DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS" |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS" |
| CFRZ | CORE OVERALL LENGTH | 46.3125 INCHES NOMINAL" |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE" |
| CFSL | CORE REMOVABILITY | NONREMOVABLE" |
| CGDN | MINIMUM OPERATING RADIUS | 10.000 INCHES" |
| ZZZV | FSC APPLICATION DATA | ACFT WING FLAP CONTROL ASSEMBLY" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
