If you are in need of NSN parts such as 5338742-035D, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Cap Socket Head and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like North American Bolt And Screw Co Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5305012412649 parts like 5338742-035D by North American Bolt And Screw Co Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as North American Bolt And Screw Co Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-241-2649 Item Description: Screw Cap Socket Head | 5305 | 012412649 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
5338742-035d | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJF | THREAD DIRECTION | RIGHT-HAND" |
AASA | THREAD LENGTH | 14.4 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM" |
AASB | FASTENER LENGTH | 16.00 MILLIMETERS NOMINAL" |
AASK | HEAD STYLE | FLAT CHAMFER" |
AASL | HEAD DIAMETER | 8.28 MILLIMETERS MINIMUM AND 8.50 MILLIMETERS MAXIMUM" |
AASU | HEAD HEIGHT | 4.82 MILLIMETERS MINIMUM AND 5.00 MILLIMETERS MAXIMUM" |
AAUB | HOLE DIAMETER | 1.20 MILLIMETERS MINIMUM AND 1.35 MILLIMETERS MAXIMUM" |
ABQZ | INTERNAL DRIVE STYLE | HEXAGON" |
AHYM | NOMINAL THREAD DIAMETER | 5.0 MILLIMETERS" |
ASDB | WIDTH ACROSS FLATS | 4.03 MILLIMETERS MINIMUM AND 4.15 MILLIMETERS MAXIMUM" |
ASXK | HOLE QUANTITY | 2" |
BQDM | HOLE TYPE | DRILLED" |
CQBC | MINIMUM TENSILE STRENGTH | 113000 POUNDS PER SQUARE INCH" |
CQQR | THREAD PITCH IN MILLIMETERS | 0.8" |
CQWR | EXTERNAL THREAD TOLERANCE CLASS | 6G" |
CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON" |
MATT | MATERIAL | STEEL OVERALL" |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL OR ZINC OVERALL AND CHROMATE OVERALL OR ALUMINUM OVERALL AND CHROMATE OVERALL" |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-87115 CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL OR MIL-C-83488 TY 2 CL 2 MIL SPEC 3RD TREATMENT RESPONSE OVERALL" |
THSD | THREAD SERIES DESIGNATOR | M" |
AAJF | THREAD DIRECTION | RIGHT-HAND" |
AASA | THREAD LENGTH | 14.4 MILLIMETERS MINIMUM AND 16.0 MILLIMETERS MAXIMUM" |
AASB | FASTENER LENGTH | 16.00 MILLIMETERS NOMINAL" |
AASK | HEAD STYLE | FLAT CHAMFER" |
AASL | HEAD DIAMETER | 8.28 MILLIMETERS MINIMUM AND 8.50 MILLIMETERS MAXIMUM" |
AASU | HEAD HEIGHT | 4.82 MILLIMETERS MINIMUM AND 5.00 MILLIMETERS MAXIMUM" |
AAUB | HOLE DIAMETER | 1.20 MILLIMETERS MINIMUM AND 1.35 MILLIMETERS MAXIMUM" |
ABQZ | INTERNAL DRIVE STYLE | HEXAGON" |
AHYM | NOMINAL THREAD DIAMETER | 5.0 MILLIMETERS" |
ASDB | WIDTH ACROSS FLATS | 4.03 MILLIMETERS MINIMUM AND 4.15 MILLIMETERS MAXIMUM" |
ASXK | HOLE QUANTITY | 2" |
BQDM | HOLE TYPE | DRILLED" |
CQBC | MINIMUM TENSILE STRENGTH | 113000 POUNDS PER SQUARE INCH" |
CQQR | THREAD PITCH IN MILLIMETERS | 0.8" |
CQWR | EXTERNAL THREAD TOLERANCE CLASS | 6G" |
CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON" |
MATT | MATERIAL | STEEL OVERALL" |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL OR ZINC OVERALL AND CHROMATE OVERALL OR ALUMINUM OVERALL AND CHROMATE OVERALL" |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-87115 CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL OR MIL-C-83488 TY 2 CL 2 MIL SPEC 3RD TREATMENT RESPONSE OVERALL" |
THSD | THREAD SERIES DESIGNATOR | M" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|