If you are in need of NSN parts such as MS20426AD3-17F-5, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Rivet Solid and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like National Aerospace Standards Com.
Note : We will not share your information to any third parties.
Each of our NSN 5320014999170 parts like MS20426AD3-17F-5 by National Aerospace Standards Com is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as National Aerospace Standards Com and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5320-01-499-9170 Item Description: Rivet Solid | 5320 | 014999170 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
Ms20426ad3-17f-5 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AASB | FASTENER LENGTH | 1.368 INCHES MINIMUM AND 1.385 INCHES MAXIMUM" |
AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)" |
AAZE | SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM" |
AAZF | SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP" |
AAZG | HEAD MAJOR DIAMETER | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM" |
AGAV | III END ITEM IDENTIFICATION | LAU-127B/ALAU" |
CRSQ | COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM" |
HEAT | HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL" |
MATT | MATERIAL | ALUMINUM ALLOY 2117 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | ANY ACCEPTABLE OVERALL" |
AASB | FASTENER LENGTH | 1.368 INCHES MINIMUM AND 1.385 INCHES MAXIMUM" |
AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)" |
AAZE | SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM" |
AAZF | SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP" |
AAZG | HEAD MAJOR DIAMETER | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM" |
AGAV | III END ITEM IDENTIFICATION | LAU-127B/ALAU" |
CRSQ | COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM" |
HEAT | HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL" |
MATT | MATERIAL | ALUMINUM ALLOY 2117 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | ANY ACCEPTABLE OVERALL" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|