If you are in need of NSN parts such as MS21134-12030, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bolt Shear and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like National Aerospace Standards Com.
Note : We will not share your information to any third parties.
Each of our NSN 5306013139202 parts like MS21134-12030 by National Aerospace Standards Com is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as National Aerospace Standards Com and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-313-9202 Item Description: Bolt Shear | 5306 | 013139202 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Ms21134-12030 | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 1.053 INCHES MINIMUM AND 1.103 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 2.938 INCHES MINIMUM AND 2.968 INCHES MAXIMUM" |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER" |
| AASU | HEAD HEIGHT | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM" |
| AATC | EXTENDED WASHER DIAMETER | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM" |
| AATD | EXTENDED WASHER THICKNESS | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM" |
| AAZH | HEAD MINOR DIAMETER | 0.797 INCHES MINIMUM AND 0.812 INCHES MAXIMUM" |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES" |
| ANEE | GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 1.053 INCHES MINIMUM AND 1.103 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 2.938 INCHES MINIMUM AND 2.968 INCHES MAXIMUM" |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER" |
| AASU | HEAD HEIGHT | 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM" |
| AATC | EXTENDED WASHER DIAMETER | 1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM" |
| AATD | EXTENDED WASHER THICKNESS | 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM" |
| AAZH | HEAD MINOR DIAMETER | 0.797 INCHES MINIMUM AND 0.812 INCHES MAXIMUM" |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES" |
| ANEE | GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 16" |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
