If you are in need of NSN parts such as NAS1153E4A, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Close Tolerance and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like National Aerospace Standards Com.
Note : We will not share your information to any third parties.
Each of our NSN 5305013847368 parts like NAS1153E4A by National Aerospace Standards Com is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as National Aerospace Standards Com and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-384-7368 Item Description: Screw Close Tolerance | 5305 | 013847368 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
Nas1153e4a | 5 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A" |
AAJF | THREAD DIRECTION | RIGHT-HAND" |
AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM" |
AASB | FASTENER LENGTH | 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM" |
AASK | HEAD STYLE | FLAT COUNTERSUNK" |
AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM" |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM" |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES" |
ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM" |
CMLP | THREAD QUANTITY PER INCH | 32" |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
MATT | MATERIAL | IRON ALLOY 660 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | ALUMINUM OVERALL" |
THSD | THREAD SERIES DESIGNATOR | UNJF" |
ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD" |
AAJD | THREAD CLASS | 3A" |
AAJF | THREAD DIRECTION | RIGHT-HAND" |
AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM" |
AASB | FASTENER LENGTH | 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM" |
AASK | HEAD STYLE | FLAT COUNTERSUNK" |
AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM" |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM" |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES" |
ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM" |
CMLP | THREAD QUANTITY PER INCH | 32" |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
MATT | MATERIAL | IRON ALLOY 660 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
SFTT | SURFACE TREATMENT | ALUMINUM OVERALL" |
THSD | THREAD SERIES DESIGNATOR | UNJF" |
ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|