If you are in need of NSN parts such as NAS1153V28, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Close Tolerance and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like National Aerospace Standards Com.
Note : We will not share your information to any third parties.
Each of our NSN 5305004567826 parts like NAS1153V28 by National Aerospace Standards Com is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as National Aerospace Standards Com and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-456-7826 Item Description: Screw Close Tolerance | 5305 | 004567826 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
Nas1153v28 | C | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A" |
AAJF | THREAD DIRECTION | RIGHT-HAND" |
AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM" |
AASB | FASTENER LENGTH | 2.011 INCHES MINIMUM AND 2.041 INCHES MAXIMUM" |
AASK | HEAD STYLE | FLAT COUNTERSUNK" |
AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM" |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM" |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES" |
ANEE | GRIP LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM" |
CMLP | THREAD QUANTITY PER INCH | 32" |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL" |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS" |
MATT | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
THSD | THREAD SERIES DESIGNATOR | UNJF" |
AAJD | THREAD CLASS | 3A" |
AAJF | THREAD DIRECTION | RIGHT-HAND" |
AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM" |
AASB | FASTENER LENGTH | 2.011 INCHES MINIMUM AND 2.041 INCHES MAXIMUM" |
AASK | HEAD STYLE | FLAT COUNTERSUNK" |
AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM" |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM" |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES" |
ANEE | GRIP LENGTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM" |
CMLP | THREAD QUANTITY PER INCH | 32" |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL" |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS" |
MATT | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL" |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
THSD | THREAD SERIES DESIGNATOR | UNJF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|