If you are in need of NSN parts such as MS24677-45C, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Cap Socket Head and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like National Aerospace Standards Com.
Note : We will not share your information to any third parties.
Each of our NSN 5305002259449 parts like MS24677-45C by National Aerospace Standards Com is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as National Aerospace Standards Com and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-225-9449 Item Description: Screw Cap Socket Head | 5305 | 002259449 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Ms24677-45c | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 1.000 INCHES MINIMUM" |
| AASB | FASTENER LENGTH | 3.000 INCHES NOMINAL" |
| AASK | HEAD STYLE | FLAT CHAMFER" |
| AASL | HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM" |
| AASU | HEAD HEIGHT | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM" |
| AAUB | HOLE DIAMETER | 0.050 INCHES NOMINAL" |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ASDB | WIDTH ACROSS FLATS | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM" |
| ASXK | HOLE QUANTITY | 6" |
| BQDM | HOLE TYPE | DRILLED" |
| CMLP | THREAD QUANTITY PER INCH | 20" |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL" |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH" |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE" |
| MATT | MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,ANY COMPOSITION WHICH CAN BE HEAT TREATED IN ACCORDANCE WITH MIL-H-6875 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 1.000 INCHES MINIMUM" |
| AASB | FASTENER LENGTH | 3.000 INCHES NOMINAL" |
| AASK | HEAD STYLE | FLAT CHAMFER" |
| AASL | HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM" |
| AASU | HEAD HEIGHT | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM" |
| AAUB | HOLE DIAMETER | 0.050 INCHES NOMINAL" |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ASDB | WIDTH ACROSS FLATS | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM" |
| ASXK | HOLE QUANTITY | 6" |
| BQDM | HOLE TYPE | DRILLED" |
| CMLP | THREAD QUANTITY PER INCH | 20" |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL" |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH" |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE" |
| MATT | MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,ANY COMPOSITION WHICH CAN BE HEAT TREATED IN ACCORDANCE WITH MIL-H-6875 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
