If you are in need of NSN parts such as T543, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bearing Ball Duplex and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Mpb Corp.
Note : We will not share your information to any third parties.
Each of our NSN 3110011913230 parts like T543 by Mpb Corp is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Mpb Corp and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-191-3230 Item Description: Bearing Ball Duplex | 3110 | 011913230 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| T543 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.6040 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM" |
| ABXV | BORE DIAMETER | 3.0622 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM" |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.8746 INCHES MINIMUM AND 3.8750 INCHES MAXIMUM" |
| ADZG | LUBRICATION MATERIAL | OIL" |
| AGYE | SURFACE FINISH | GROUND" |
| AGYF | RETAINER FABRICATION METHOD | PRESSED" |
| AGYK | SHIELD QUANTITY | 2" |
| AGZC | LOAD DIRECTION | ANGULAR" |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T" |
| CTHQ | BEARING PRELOAD RATING | 90.0 POUNDS MINIMUM AND 110.0 POUNDS MAXIMUM" |
| CTHY | CONTACT ANGLE | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM" |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATE RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; ONE SHIELD EACH BEARING" |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE" |
| MATT | MATERIAL | COTTON RETAINER AND PLASTIC PHENOLIC RETAINER" |
| MATT | MATERIAL | STEEL COMP 440C BALL" |
| MATT | MATERIAL | STEEL COMP 440C INNER RING" |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING" |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER" |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING" |
| ZZZK | SPECIFICATION/STANDARD DATA | 82577-901861 MANUFACTURERS STANDARD" |
| ABMK | OVERALL WIDTH | 0.6040 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM" |
| ABXV | BORE DIAMETER | 3.0622 INCHES MINIMUM AND 3.0625 INCHES MAXIMUM" |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.8746 INCHES MINIMUM AND 3.8750 INCHES MAXIMUM" |
| ADZG | LUBRICATION MATERIAL | OIL" |
| AGYE | SURFACE FINISH | GROUND" |
| AGYF | RETAINER FABRICATION METHOD | PRESSED" |
| AGYK | SHIELD QUANTITY | 2" |
| AGZC | LOAD DIRECTION | ANGULAR" |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 5T" |
| CTHQ | BEARING PRELOAD RATING | 90.0 POUNDS MINIMUM AND 110.0 POUNDS MAXIMUM" |
| CTHY | CONTACT ANGLE | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM" |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATE RETAINER WITH SPECIFIED OIL,CENTRIFUGE FOR 2 MINUTES AT 100 G AFTER VACUUM; INSCRIBE MATCH MARK ON OD OF EACH BEARING; ONE SHIELD EACH BEARING" |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE" |
| MATT | MATERIAL | COTTON RETAINER AND PLASTIC PHENOLIC RETAINER" |
| MATT | MATERIAL | STEEL COMP 440C BALL" |
| MATT | MATERIAL | STEEL COMP 440C INNER RING" |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING" |
| MATT | MATERIAL | STEEL CORROSION RESISTING SHIELD" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER" |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING" |
| ZZZK | SPECIFICATION/STANDARD DATA | 82577-901861 MANUFACTURERS STANDARD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
