If you are in need of NSN parts such as 005714, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Helical and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Mitsubishi Caterpillar Forklift.
Note : We will not share your information to any third parties.
Each of our NSN 3020002002065 parts like 005714 by Mitsubishi Caterpillar Forklift is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Mitsubishi Caterpillar Forklift and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-200-2065 Item Description: Gear Helical | 3020 | 002002065 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 005714 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGJS | PITCH DIAMETER | 0.8514 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 9" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN TRANSVERSELY THROUGH HUB, FIRST END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.993 INCHES" |
| CWMW | TEETH TYPE | SINGLE HELIX" |
| CWNH | TOOTH FORM | STANDARD" |
| CWNM | TOOTH DIRECTION | LEFT" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWPZ | HELIX ANGLE | 28.2499 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.438 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.625 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.499 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.063 INCHES FIRST END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 0.870 INCHES FIRST END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.188 INCHES FIRST END" |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.189 INCHES TRANSVERSELY THROUGH HUB, FIRST END" |
| MATT | III MATERIAL | STEEL COMP 1022 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGJS | PITCH DIAMETER | 0.8514 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 9" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN TRANSVERSELY THROUGH HUB, FIRST END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.993 INCHES" |
| CWMW | TEETH TYPE | SINGLE HELIX" |
| CWNH | TOOTH FORM | STANDARD" |
| CWNM | TOOTH DIRECTION | LEFT" |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
| CWPZ | HELIX ANGLE | 28.2499 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.438 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.625 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.499 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.063 INCHES FIRST END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 0.870 INCHES FIRST END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.188 INCHES FIRST END" |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.189 INCHES TRANSVERSELY THROUGH HUB, FIRST END" |
| MATT | III MATERIAL | STEEL COMP 1022 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
