If you are in need of NSN parts such as 103523, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Elbow Flange and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Miltech Mfg Inc.
Note : We will not share your information to any third parties.
Each of our NSN 4730010357863 parts like 103523 by Miltech Mfg Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Miltech Mfg Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-01-035-7863 Item Description: Elbow Flange | 4730 | 010357863 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 103523 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AECS | BOLT HOLE QUANTITY | 4 2ND END" |
| AECS | BOLT HOLE QUANTITY | 8 1ST END" |
| AHSJ | LEG LENGTH | 3.500 INCHES NOMINAL 2ND END" |
| AHSJ | LEG LENGTH | 4.000 INCHES NOMINAL 1ST END" |
| AKGF | NOMINAL WIDTH | 4.750 INCHES 2ND END" |
| AKGG | NOMINAL LENGTH | 4.750 INCHES 2ND END" |
| ARKN | FLANGE SHAPE | RECTANGULAR WITH HOLES 2ND END" |
| ARKN | FLANGE SHAPE | ROUND WITH HOLES 1ST END" |
| AWLS | CONNECTION TYPE | FLANGE ALL ENDS" |
| CRFY | FLOW ANGLE | 90.0 DEGREES" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.625 INCHES 1ST END" |
| CWCK | NOMINAL THICKNESS | 0.375 INCHES ALL ENDS" |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.438 INCHES ALL ENDS" |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | 5.875 INCHES 1ST END" |
| CWCY | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.500 INCHES 2ND END" |
| CWDC | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.500 INCHES 2ND END" |
| CWDF | FLANGE FACE DESIGN | PLAIN ALL ENDS" |
| MATT | MATERIAL | ALUMINUM ALLOY OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FLUID SINGLE RESPONSE" |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL" |
| AECS | BOLT HOLE QUANTITY | 4 2ND END" |
| AECS | BOLT HOLE QUANTITY | 8 1ST END" |
| AHSJ | LEG LENGTH | 3.500 INCHES NOMINAL 2ND END" |
| AHSJ | LEG LENGTH | 4.000 INCHES NOMINAL 1ST END" |
| AKGF | NOMINAL WIDTH | 4.750 INCHES 2ND END" |
| AKGG | NOMINAL LENGTH | 4.750 INCHES 2ND END" |
| ARKN | FLANGE SHAPE | RECTANGULAR WITH HOLES 2ND END" |
| ARKN | FLANGE SHAPE | ROUND WITH HOLES 1ST END" |
| AWLS | CONNECTION TYPE | FLANGE ALL ENDS" |
| CRFY | FLOW ANGLE | 90.0 DEGREES" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.625 INCHES 1ST END" |
| CWCK | NOMINAL THICKNESS | 0.375 INCHES ALL ENDS" |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.438 INCHES ALL ENDS" |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | 5.875 INCHES 1ST END" |
| CWCY | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.500 INCHES 2ND END" |
| CWDC | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 3.500 INCHES 2ND END" |
| CWDF | FLANGE FACE DESIGN | PLAIN ALL ENDS" |
| MATT | MATERIAL | ALUMINUM ALLOY OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FLUID SINGLE RESPONSE" |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
