If you are in need of NSN parts such as 96A96-0900-094, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Machine And Mfg Co Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020000379570 parts like 96A96-0900-094 by Machine And Mfg Co Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Machine And Mfg Co Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-037-9570 Item Description: Gear Spur | 3020 | 000379570 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
96a96-0900-094 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID" |
ABSX | ATTACHMENT METHOD | CLAMP" |
AGJS | PITCH DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM" |
AJLA | TEETH QUANTITY | 96" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.020 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.285 INCHES" |
CWNH | TOOTH FORM | STANDARD" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.160 INCHES FIRST END" |
CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.092 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END" |
CWTX | HUB NOMINAL DIAMETER | 0.310 INCHES FIRST END" |
CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.160 INCHES FIRST END" |
CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11" |
MATT | III MATERIAL | ALUMINUM ALLOY OVERALL" |
SFTT | SURFACE TREATMENT | ANODIZE OVERALL" |
STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
AAQL | BODY STYLE | PLAIN, SOLID" |
ABSX | ATTACHMENT METHOD | CLAMP" |
AGJS | PITCH DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM" |
AJLA | TEETH QUANTITY | 96" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.020 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.285 INCHES" |
CWNH | TOOTH FORM | STANDARD" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.160 INCHES FIRST END" |
CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.092 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END" |
CWTX | HUB NOMINAL DIAMETER | 0.310 INCHES FIRST END" |
CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.160 INCHES FIRST END" |
CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11" |
MATT | III MATERIAL | ALUMINUM ALLOY OVERALL" |
SFTT | SURFACE TREATMENT | ANODIZE OVERALL" |
STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|