If you are in need of NSN parts such as 7101, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Generator Engine Accessory and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Linde Lift Truck Corp.
Note : We will not share your information to any third parties.
Each of our NSN 2920009368247 parts like 7101 by Linde Lift Truck Corp is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Linde Lift Truck Corp and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-936-8247 Item Description: Generator Engine Accessory | 2920 | 009368247 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 7101 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL" |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY" |
| ABPT | SECOND STEP DIAMETER | 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM" |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL" |
| ABVA | UNTHREADED PORTION LENGTH | 0.710 INCHES NOMINAL" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED" |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 0.766 INCHES NOMINAL" |
| AWDP | THREAD DIAMETER | 0.669 INCHES NOMINAL" |
| AXHX | GROUND POLARITY TYPE | NEGATIVE" |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2500" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0" |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1100" |
| BCGN | GROUNDING METHOD | INTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.380 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.190 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 163.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.118 INCHES MINIMUM AND 6.131 INCHES MAXIMUM" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 6.998 INCHES MINIMUM AND 7.011 INCHES MAXIMUM" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000" |
| BZRR | THREAD SERIES | UNS" |
| CFHL | THREAD CLASS | 2A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 1.312 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 20" |
| ELEC | VOLTAGE IN VOLTS | 12.0" |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL" |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY" |
| ABPT | SECOND STEP DIAMETER | 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM" |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL" |
| ABVA | UNTHREADED PORTION LENGTH | 0.710 INCHES NOMINAL" |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND" |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED" |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL" |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE" |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 0.766 INCHES NOMINAL" |
| AWDP | THREAD DIAMETER | 0.669 INCHES NOMINAL" |
| AXHX | GROUND POLARITY TYPE | NEGATIVE" |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2500" |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0" |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1100" |
| BCGN | GROUNDING METHOD | INTERNAL" |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY" |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.380 INCHES NOMINAL" |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.190 INCHES NOMINAL" |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0" |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 163.0" |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.118 INCHES MINIMUM AND 6.131 INCHES MAXIMUM" |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 6.998 INCHES MINIMUM AND 7.011 INCHES MAXIMUM" |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM" |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000" |
| BZRR | THREAD SERIES | UNS" |
| CFHL | THREAD CLASS | 2A" |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC" |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 1.312 INCHES NOMINAL" |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18" |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B" |
| CMLP | THREAD QUANTITY PER INCH | 20" |
| ELEC | VOLTAGE IN VOLTS | 12.0" |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
