If you are in need of NSN parts such as NAS1121-15H, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Close Tolerance and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Lawrence Engineering And Supply Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5305010257762 parts like NAS1121-15H by Lawrence Engineering And Supply Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Lawrence Engineering And Supply Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-025-7762 Item Description: Screw Close Tolerance | 5305 | 010257762 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Nas1121-15h | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 1.199 INCHES MINIMUM AND 1.229 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT CHAMFER" |
| AASL | HEAD DIAMETER | 0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM" |
| AASU | HEAD HEIGHT | 0.074 INCHES MINIMUM AND 0.086 INCHES MAXIMUM" |
| AAUB | HOLE DIAMETER | 0.038 INCHES NOMINAL" |
| AAUR | GRIP DIAMETER | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES" |
| ANEE | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM" |
| ASXK | HOLE QUANTITY | 2" |
| BQDM | HOLE TYPE | DRILLED" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL" |
| CRHC | HOLE CONFIGURATION STYLE | ROUND" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS" |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT" |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJC" |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1121 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD" |
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 1.199 INCHES MINIMUM AND 1.229 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT CHAMFER" |
| AASL | HEAD DIAMETER | 0.221 INCHES MINIMUM AND 0.226 INCHES MAXIMUM" |
| AASU | HEAD HEIGHT | 0.074 INCHES MINIMUM AND 0.086 INCHES MAXIMUM" |
| AAUB | HOLE DIAMETER | 0.038 INCHES NOMINAL" |
| AAUR | GRIP DIAMETER | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES" |
| ANEE | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM" |
| ASXK | HOLE QUANTITY | 2" |
| BQDM | HOLE TYPE | DRILLED" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL" |
| CRHC | HOLE CONFIGURATION STYLE | ROUND" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS" |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT" |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL" |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJC" |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1121 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
