If you are in need of NSN parts such as S6110-26027, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bolt Fluid Passage and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Jones And Co.
Note : We will not share your information to any third parties.
Each of our NSN 4730007037681 parts like S6110-26027 by Jones And Co is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Jones And Co and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-00-703-7681 Item Description: Bolt Fluid Passage | 4730 | 007037681 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| S6110-26027 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN" |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.375 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.125 INCHES NOMINAL" |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE" |
| ACKN | FIRST END STYLE DESIGNATOR | PLAIN" |
| ACLK | FIRST END THREAD CLASS | 3A" |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND" |
| ACLT | SECOND END STYLE DESIGNATOR | PLAIN" |
| ASDB | WIDTH ACROSS FLATS | 0.812 INCHES NOMINAL" |
| ATKZ | FIRST END THREAD LENGTH | 0.750 INCHES NOMINAL" |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON" |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.556 INCHES MINIMUM AND 0.560 INCHES MAXIMUM" |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 1.062 INCHES NOMINAL" |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| BBKZ | SECOND RADIAL FLUID HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.812 INCHES NOMINAL" |
| BBLF | WRENCHING FEATURE HEIGHT | 0.312 INCHES NOMINAL" |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM" |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 18" |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF" |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.563 INCHES" |
| MATT | III MATERIAL | STEEL COMP 4130" |
| SFTT | SURFACE TREATMENT | CADMIUM" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE" |
| AAQL | BODY STYLE | PLAIN" |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.375 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.125 INCHES NOMINAL" |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE" |
| ACKN | FIRST END STYLE DESIGNATOR | PLAIN" |
| ACLK | FIRST END THREAD CLASS | 3A" |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND" |
| ACLT | SECOND END STYLE DESIGNATOR | PLAIN" |
| ASDB | WIDTH ACROSS FLATS | 0.812 INCHES NOMINAL" |
| ATKZ | FIRST END THREAD LENGTH | 0.750 INCHES NOMINAL" |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON" |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.556 INCHES MINIMUM AND 0.560 INCHES MAXIMUM" |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 1.062 INCHES NOMINAL" |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| BBKZ | SECOND RADIAL FLUID HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.812 INCHES NOMINAL" |
| BBLF | WRENCHING FEATURE HEIGHT | 0.312 INCHES NOMINAL" |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM" |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 18" |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF" |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.563 INCHES" |
| MATT | III MATERIAL | STEEL COMP 4130" |
| SFTT | SURFACE TREATMENT | CADMIUM" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
