If you are in need of NSN parts such as TAPF10K35, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Capacitor Fixed Electrolytic and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Itt Cannon Rf Products.
Note : We will not share your information to any third parties.
Each of our NSN 5910012026160 parts like TAPF10K35 by Itt Cannon Rf Products is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Itt Cannon Rf Products and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-202-6160 Item Description: Capacitor Fixed Electrolytic | 5910 | 012026160 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Tapf10k35 | 1 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE ENDW/O MTG FACILITIES, TERMINAL(S) ON ONE ENDW/O MTG FACILITIES, TERMINAL(S) ON ONE END" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHEDNOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.177 INCHES NOMINAL0.177 INCHES NOMINAL0.177 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.255 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 0.393 INCHES MAXIMUM" |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.200 INCHES NOMINAL" |
| AEBT | TERMINAL DIAMETER | 0.016 INCHES MINIMUM" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S)" |
| AECE | ANODE TYPE | SOLID" |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 2.5" |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 10.000 MICROFARADS SINGLE SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 35.0 DC SINGLE SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00/+10.00 PERCENT SINGLE SECTION" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | TANTALUM" |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 8.0000" |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | 5.000 MICROAMPERES" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD" |
| AAQL | BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE ENDW/O MTG FACILITIES, TERMINAL(S) ON ONE ENDW/O MTG FACILITIES, TERMINAL(S) ON ONE END" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHEDNOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.177 INCHES NOMINAL0.177 INCHES NOMINAL0.177 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.255 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 0.393 INCHES MAXIMUM" |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.200 INCHES NOMINAL" |
| AEBT | TERMINAL DIAMETER | 0.016 INCHES MINIMUM" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S)" |
| AECE | ANODE TYPE | SOLID" |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 2.5" |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 10.000 MICROFARADS SINGLE SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 35.0 DC SINGLE SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00/+10.00 PERCENT SINGLE SECTION" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | TANTALUM" |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 8.0000" |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | 5.000 MICROAMPERES" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
