If you are in need of NSN parts such as 13029-1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Solenoid Electrical and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Imc Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5945009874619 parts like 13029-1 by Imc Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Imc Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5945-00-987-4619 Item Description: Solenoid Electrical | 5945 | 009874619 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 13029-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B ALL FACILITIES HOLE" |
| AAQL | III BODY STYLE | CYLINDRICAL FRAME" |
| AASA | THREAD LENGTH | 0.250 INCHES MINIMUM POWER TAKEOFF FACILITY HOLE" |
| ABPM | BODY DIAMETER | 1.250 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.620 INCHES MAXIMUM" |
| ADTV | CASE MATERIAL | STEEL" |
| ADTY | CASE SURFACE TREATMENT | NICKEL" |
| AEXW | MOUNTING BASE WIDTH | 1.562 INCHES NOMINAL" |
| AFGK | ACTUATOR LENGTH | 0.180 INCHES MINIMUM" |
| AFUR | ACTUATOR DIAMETER | 0.310 INCHES MINIMUM AND 0.405 INCHES MAXIMUM" |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL" |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED" |
| APAF | MAGNETIC COIL QUANTITY | 1" |
| APNP | DUTY TYPE | CONTINUOUS" |
| APXH | TERMINAL LOCATION | CIRCUMFERENCE" |
| ASXH | VOLTAGE RATING IN VOLTS | 115.0 AC NOMINAL" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 BRACKET AND 3 THREADED HOLE" |
| AXNP | CURRENT RATING | 150.0 MILLIAMPERES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 40 ALL FACILITIES HOLE" |
| CNXT | ACTUATOR STROKE TYPE | PULL" |
| CNXW | LINEAR FORCE DELIVERED | 6.00 OUNCES" |
| CNXX | POWER TAKEOFF CONNECTION TYPE | INTERNAL THREADS" |
| CNYD | ENERGIZING STROKE MAXIMUM LENGTH | 0.150 INCHES" |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES ALL FACILITIES HOLE" |
| CQYJ | MOUNTING FACILITY PATTERN | ISOSCELES TRIANGLE" |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 0.500 INCHES NOMINAL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-4040 MIL SPEC SINGLE MATERIAL RESPONSE" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE" |
| TEST | TEST DATA DOCUMENT | 06481-935084 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| THSD | THREAD SERIES DESIGNATOR | UNC ALL FACILITIES HOLE" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SOLDERLESS LUG" |
| AAJD | THREAD CLASS | 2B ALL FACILITIES HOLE" |
| AAQL | III BODY STYLE | CYLINDRICAL FRAME" |
| AASA | THREAD LENGTH | 0.250 INCHES MINIMUM POWER TAKEOFF FACILITY HOLE" |
| ABPM | BODY DIAMETER | 1.250 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.620 INCHES MAXIMUM" |
| ADTV | CASE MATERIAL | STEEL" |
| ADTY | CASE SURFACE TREATMENT | NICKEL" |
| AEXW | MOUNTING BASE WIDTH | 1.562 INCHES NOMINAL" |
| AFGK | ACTUATOR LENGTH | 0.180 INCHES MINIMUM" |
| AFUR | ACTUATOR DIAMETER | 0.310 INCHES MINIMUM AND 0.405 INCHES MAXIMUM" |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL" |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED" |
| APAF | MAGNETIC COIL QUANTITY | 1" |
| APNP | DUTY TYPE | CONTINUOUS" |
| APXH | TERMINAL LOCATION | CIRCUMFERENCE" |
| ASXH | VOLTAGE RATING IN VOLTS | 115.0 AC NOMINAL" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 BRACKET AND 3 THREADED HOLE" |
| AXNP | CURRENT RATING | 150.0 MILLIAMPERES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 40 ALL FACILITIES HOLE" |
| CNXT | ACTUATOR STROKE TYPE | PULL" |
| CNXW | LINEAR FORCE DELIVERED | 6.00 OUNCES" |
| CNXX | POWER TAKEOFF CONNECTION TYPE | INTERNAL THREADS" |
| CNYD | ENERGIZING STROKE MAXIMUM LENGTH | 0.150 INCHES" |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES ALL FACILITIES HOLE" |
| CQYJ | MOUNTING FACILITY PATTERN | ISOSCELES TRIANGLE" |
| CSQJ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 0.500 INCHES NOMINAL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-4040 MIL SPEC SINGLE MATERIAL RESPONSE" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 MIL SPEC SINGLE TREATMENT RESPONSE" |
| TEST | TEST DATA DOCUMENT | 06481-935084 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| THSD | THREAD SERIES DESIGNATOR | UNC ALL FACILITIES HOLE" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SOLDERLESS LUG" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
