If you are in need of NSN parts such as 7108155-4, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Helical and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Illinois Tool Works Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020014944274 parts like 7108155-4 by Illinois Tool Works Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Illinois Tool Works Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-494-4274 Item Description: Gear Helical | 3020 | 014944274 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 7108155-4 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSA | SPLINE QUANTITY | 32 BOTH ENDS" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGAV | END ITEM IDENTIFICATION | GEARBOX,RAMMER DRIVE" |
| AGJS | PITCH DIAMETER | 6.1900 INCHES MINIMUM AND 6.2100 INCHES MAXIMUM" |
| AJLA | TEETH QUANTITY | 67" |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS" |
| BDTX | SPLINE PITCH DIAMETER | 2.0000 INCHES NOMINAL BOTH ENDS" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH FLANGE" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.0000 INCHES" |
| CWMW | TEETH TYPE | SPIRAL" |
| CWNM | TOOTH DIRECTION | RIGHT" |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 25.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.458 INCHES BETWEEN BODY AND FLANGE" |
| CWRM | FACE NOMINAL WIDTH | 1.4000 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.0500 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS" |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS" |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.350 INCHES AXIALLY THROUGH FLANGE" |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.500 INCHES AXIALLY THROUGH FLANGE" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE,RH" |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1;MATES WITH P/N H832-1662-3 (NSN 3040-01-494-3543) AND -16 (CAGE 96169);MATCHED PAIR H832-1662-3 & 4 NSN 3020-01-494-0562;NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053;USED ON NSSN CLASS SUBMARINE" |
| MATT | III MATERIAL | STEEL COMP E9310 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 GR-9310 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSA | SPLINE QUANTITY | 32 BOTH ENDS" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGAV | END ITEM IDENTIFICATION | GEARBOX,RAMMER DRIVE" |
| AGJS | PITCH DIAMETER | 6.1900 INCHES MINIMUM AND 6.2100 INCHES MAXIMUM" |
| AJLA | TEETH QUANTITY | 67" |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS" |
| BDTX | SPLINE PITCH DIAMETER | 2.0000 INCHES NOMINAL BOTH ENDS" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 2 PLAIN AXIALLY THROUGH FLANGE" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.0000 INCHES" |
| CWMW | TEETH TYPE | SPIRAL" |
| CWNM | TOOTH DIRECTION | RIGHT" |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 25.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.458 INCHES BETWEEN BODY AND FLANGE" |
| CWRM | FACE NOMINAL WIDTH | 1.4000 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 2.0500 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS" |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS" |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.350 INCHES AXIALLY THROUGH FLANGE" |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 4.500 INCHES AXIALLY THROUGH FLANGE" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE,RH" |
| FEAT | SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1;MATES WITH P/N H832-1662-3 (NSN 3040-01-494-3543) AND -16 (CAGE 96169);MATCHED PAIR H832-1662-3 & 4 NSN 3020-01-494-0562;NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053;USED ON NSSN CLASS SUBMARINE" |
| MATT | III MATERIAL | STEEL COMP E9310 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | DOD-F-24669/1 GR-9310 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
