If you are in need of NSN parts such as 301A, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Non and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Genrad Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905001084667 parts like 301A by Genrad Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Genrad Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-108-4667 Item Description: Resistor Variable Wire Wound Non | 5905 | 001084667 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 301a | C | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS SINGLE SECTION" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL" |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.190 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 0.320 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 OHMS SINGLE SECTION" |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
