If you are in need of NSN parts such as 933A377P1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bracket Double Angle and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like General Electric Co.
Note : We will not share your information to any third parties.
Each of our NSN 5340007989186 parts like 933A377P1 by General Electric Co is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as General Electric Co and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-798-9186 Item Description: Bracket Double Angle | 5340 | 007989186 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 933a377p1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD (NON-CORE) | MACHINED" |
| ADLK | FIRST LEG LENGTH | 0.845 INCHES MINIMUM AND 0.895 INCHES MAXIMUM" |
| ADLL | SECOND LEG LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM" |
| AHLF | SECOND LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM" |
| AHLL | FIRST LEG SLOT LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM" |
| AHLM | FIRST LEG SLOT WIDTH | 0.212 INCHES MINIMUM AND 0.224 INCHES MAXIMUM" |
| AHLN | SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL" |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AHPW | FIRST LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM" |
| AHPX | SECOND LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM" |
| AHPZ | CENTER SECTION HEIGHT | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM" |
| AHQA | CENTER SECTION WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM" |
| AHQB | CENTER SECTION THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM" |
| AHQN | FIRST LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM" |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AJFP | FIRST LEG END RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AJFQ | SECOND LEG END RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AJZU | FIRST LEG STYLE | END RADIUS" |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT" |
| AKBU | SECOND LEG STYLE | END RADIUS" |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE" |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL" |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL" |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL" |
| MATT | MATERIAL | STEEL COMP 321" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE" |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE" |
| AARN | FABRICATION METHOD (NON-CORE) | MACHINED" |
| ADLK | FIRST LEG LENGTH | 0.845 INCHES MINIMUM AND 0.895 INCHES MAXIMUM" |
| ADLL | SECOND LEG LENGTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM" |
| AHLF | SECOND LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM" |
| AHLL | FIRST LEG SLOT LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM" |
| AHLM | FIRST LEG SLOT WIDTH | 0.212 INCHES MINIMUM AND 0.224 INCHES MAXIMUM" |
| AHLN | SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL" |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AHPW | FIRST LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM" |
| AHPX | SECOND LEG THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM" |
| AHPZ | CENTER SECTION HEIGHT | 0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM" |
| AHQA | CENTER SECTION WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM" |
| AHQB | CENTER SECTION THICKNESS | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM" |
| AHQN | FIRST LEG WIDTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM" |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AJFP | FIRST LEG END RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AJFQ | SECOND LEG END RADIUS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM" |
| AJZU | FIRST LEG STYLE | END RADIUS" |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE SLOT" |
| AKBU | SECOND LEG STYLE | END RADIUS" |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE" |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL" |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL" |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL" |
| MATT | MATERIAL | STEEL COMP 321" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE" |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
