If you are in need of NSN parts such as 288C720-1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Worm Shaft and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like General Electric Co Large Steam.
Note : We will not share your information to any third parties.
Each of our NSN 3040000335815 parts like 288C720-1 by General Electric Co Large Steam is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as General Electric Co Large Steam and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-033-5815 Item Description: Worm Shaft | 3040 | 000335815 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 288c720-1 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL" |
| ABHP | OVERALL LENGTH | 20.875 INCHES NOMINAL" |
| BYFR | TEETH HARDNESS RATING | C SCALE,41 TO 45" |
| CFFB | WORM THREAD QUANTITY | 3" |
| CFFC | WORM THREAD LEAD | 2.2323 INCHES NOMINAL" |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND" |
| CFFF | WORM PRESSURE ANGLE IN DEG | 24.217" |
| CFFG | WORM HELIX ANGLE | 15 DEG 8 MIN 47.10 SEC" |
| CFFK | WORM OUTSIDE DIAMETER | 2.998 INCHES MINIMUM AND 3.000 INCHES MAXIMUM" |
| CFFL | WORM PITCH DIAMETER | 2.625 INCHES NOMINAL" |
| CFFM | SHAFT HARDNESS RATING | C SCALE,41 TO 45" |
| CFFN | WORM THREAD SECTION LENGTH | 4.250 INCHES NOMINAL" |
| CFFP | WORM BODY LENGTH | 20.875 INCHES NOMINAL" |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED" |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.813 INCHES NOMINAL FIRST END, THIRD PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.063 INCHES NOMINAL FIRST END, SECOND PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.750 INCHES NOMINAL SECOND END, SECOND PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.125 INCHES NOMINAL FIRST END, FIRST PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.250 INCHES NOMINAL SECOND END, FIRST PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 4.438 INCHES NOMINAL SECOND END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.485 INCHES MINIMUM SECOND END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.495 INCHES MAXIMUM SECOND END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.499 INCHES MINIMUM FIRST END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES MAXIMUM FIRST END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5749 INCHES MINIMUM FIRST END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5749 INCHES MINIMUM SECOND END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5753 INCHES MAXIMUM FIRST END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5753 INCHES MAXIMUM SECOND END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.125 INCHES NOMINAL FIRST END, FIRST PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.125 INCHES NOMINAL SECOND END, FIRST PORTION" |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.3700 INCHES MINIMUM SECOND END, THIRD PORTION" |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.3720 INCHES MAXIMUM SECOND END, THIRD PORTION" |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.188 INCHES NOMINAL SECOND END, THIRD PORTION" |
| CFGJ | INVOLUTE SPLINE QUANTITY | 16 FIRST END, FOURTH PORTION" |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 25.0 FIRST END, FOURTH PORTION" |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | 1.3330 INCHES NOMINAL FIRST END, FOURTH PORTION" |
| CFGM | INVOLUTE SPLINE LENGTH | 2.188 INCHES NOMINAL FIRST END, FOURTH PORTION" |
| MATL | UNABLE TO DECODE | UNABLE TO DECODE" |
| AAHN | END SIMILARITY | NOT IDENTICAL" |
| ABHP | OVERALL LENGTH | 20.875 INCHES NOMINAL" |
| BYFR | TEETH HARDNESS RATING | C SCALE,41 TO 45" |
| CFFB | WORM THREAD QUANTITY | 3" |
| CFFC | WORM THREAD LEAD | 2.2323 INCHES NOMINAL" |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND" |
| CFFF | WORM PRESSURE ANGLE IN DEG | 24.217" |
| CFFG | WORM HELIX ANGLE | 15 DEG 8 MIN 47.10 SEC" |
| CFFK | WORM OUTSIDE DIAMETER | 2.998 INCHES MINIMUM AND 3.000 INCHES MAXIMUM" |
| CFFL | WORM PITCH DIAMETER | 2.625 INCHES NOMINAL" |
| CFFM | SHAFT HARDNESS RATING | C SCALE,41 TO 45" |
| CFFN | WORM THREAD SECTION LENGTH | 4.250 INCHES NOMINAL" |
| CFFP | WORM BODY LENGTH | 20.875 INCHES NOMINAL" |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED" |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.813 INCHES NOMINAL FIRST END, THIRD PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.063 INCHES NOMINAL FIRST END, SECOND PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.750 INCHES NOMINAL SECOND END, SECOND PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.125 INCHES NOMINAL FIRST END, FIRST PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.250 INCHES NOMINAL SECOND END, FIRST PORTION" |
| CFFX | STRAIGHT UNTHREADED LENGTH | 4.438 INCHES NOMINAL SECOND END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.485 INCHES MINIMUM SECOND END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.495 INCHES MAXIMUM SECOND END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.499 INCHES MINIMUM FIRST END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES MAXIMUM FIRST END, THIRD PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5749 INCHES MINIMUM FIRST END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5749 INCHES MINIMUM SECOND END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5753 INCHES MAXIMUM FIRST END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.5753 INCHES MAXIMUM SECOND END, SECOND PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.125 INCHES NOMINAL FIRST END, FIRST PORTION" |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.125 INCHES NOMINAL SECOND END, FIRST PORTION" |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.3700 INCHES MINIMUM SECOND END, THIRD PORTION" |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.3720 INCHES MAXIMUM SECOND END, THIRD PORTION" |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.188 INCHES NOMINAL SECOND END, THIRD PORTION" |
| CFGJ | INVOLUTE SPLINE QUANTITY | 16 FIRST END, FOURTH PORTION" |
| CFGK | INVOLUTE SPLINE PRESSURE ANGLE IN DEG | 25.0 FIRST END, FOURTH PORTION" |
| CFGL | INVOLUTE SPLINE PITCH DIAMETER | 1.3330 INCHES NOMINAL FIRST END, FOURTH PORTION" |
| CFGM | INVOLUTE SPLINE LENGTH | 2.188 INCHES NOMINAL FIRST END, FOURTH PORTION" |
| MATL | UNABLE TO DECODE | UNABLE TO DECODE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
