If you are in need of NSN parts such as 204-012-109-1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Worm and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like General Dynamics Robotics System Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020013186284 parts like 204-012-109-1 by General Dynamics Robotics System Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as General Dynamics Robotics System Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-318-6284 Item Description: Gear Worm | 3020 | 013186284 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 204-012-109-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGJS | PITCH DIAMETER | 0.3220 INCHES MINIMUM AND 0.3360 INCHES MAXIMUM" |
| ALPN | FACE TYPE | STRAIGHT" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AXIALLY THROUGH HUB, FIRST END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.371 INCHES" |
| CWPC | THREAD FORM QUANTITY | 1" |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND" |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
| CWPZ | HELIX ANGLE | 3.5833 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.110 INCHES SECOND END" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.160 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.560 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.193 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS" |
| CWTX | HUB NOMINAL DIAMETER | 0.260 INCHES BOTH ENDS" |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.080 INCHES AXIALLY THROUGH HUB, FIRST END" |
| MATT | III MATERIAL | STEEL COMP 630 OR STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643,COND A ASSN STD 1ST MATERIAL RESPONSE OVERALL OR QQ-S-764,COND A,TS T0-100 FED SPEC 2ND MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE" |
| AGJS | PITCH DIAMETER | 0.3220 INCHES MINIMUM AND 0.3360 INCHES MAXIMUM" |
| ALPN | FACE TYPE | STRAIGHT" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 PLAIN AXIALLY THROUGH HUB, FIRST END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.371 INCHES" |
| CWPC | THREAD FORM QUANTITY | 1" |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND" |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
| CWPZ | HELIX ANGLE | 3.5833 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.110 INCHES SECOND END" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.160 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.560 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.193 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS" |
| CWTX | HUB NOMINAL DIAMETER | 0.260 INCHES BOTH ENDS" |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | 0.080 INCHES AXIALLY THROUGH HUB, FIRST END" |
| MATT | III MATERIAL | STEEL COMP 630 OR STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643,COND A ASSN STD 1ST MATERIAL RESPONSE OVERALL OR QQ-S-764,COND A,TS T0-100 FED SPEC 2ND MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
